Co2 Insufflator Surgical Diathermy Surgical Pumps Cold Light Source Minor OT Lights Minor OT LED Lights Major LED OT Lights Liposuction System Vessel Sealing System

Aplication Notes

This is highly portable type Bipolar Coagulator suitable for precise cauterization works in Neuro Surgery, ENT Surgery, Plastic Surgery and Gynaecological procedures. The output power is full 100 watts (most Indian diathermy units have only 50 watts output) giving smooth coagulation. The unit function is controlled through a single pedal foot switch and the power is variable in a stepless pattern.
This surgical diathermy is ideal for small clinics where minor surgical procedures are carried out. The bipolar coagulation is of excellent quality with relatively charring free coagulation and the power availability is 100watts. ENT and Paediatric surgeries can be very comfortably carried out with this equipment as also dermatological procedures. The mono cut function produces a smooth gliding cutting effect and the mono coag produces strong but relatively charring free coagulation effect.
This unit has both monopolar and bipolar output and this can be used for all routine general surgical works as well as for Bipolar applications in Gynaec, ENT, Ortho etc. This is the small version of Spark 400B. The inbuilt voltage stabilizer ensures steady output power in all the modes for line voltages from 170 to 250 volts. This unit is ideal for small hospitals and individual doctors since it has all the functions needed for routine surgical works. Another interesting aspect is that it has got a very powerful bipolar output capable of delivering full 100 watts HF power (most Indian diathermy units have only 50 watts output). The quality of bipolar coagulation is also good. Also combination use of monopolar cut with bipolar coagulation side by side is possible. For monopolar, pin point coagulation is possible. Monopolar cutting is very smooth like a scalpel sharp cut. All the accessories are autoclavable . We have used imported German silicone rubber cable and high grade nylon connectors for the accessories ensuring long life.
This is a digital power display based version of the model Spark 200B described earlier in this application note. Precise adjustment of cutting and coagulation power is possible with the digital controls. The bipolar has 100 watts power output and finds extensive use in Gynaec surgeries as well as Neuro surgeries. This model has a handswitch pencil in addition to the standard footswitch controlled handle. More over for better patient safety the unit comes with a silicone rubber patient plate.
This is a fast moving model. It has a number of positive features over our other models. This can be used for delicate applications in Neurosurgery, Paediatric surgery and can do underwater cutting including TURP. This unit has in addition to the foot switch an imported handswitch pencil. Also it has silicone rubber patient plate which prevents HF burns. There is RAPID CUT/COAG provision in this unit which saves loop life in TURP. Also the components used are mostly imported ones. The inbuilt voltage stabilizer ensures steady output power in all the modes for fluctuating line voltages from 170 volts to 250 volts. Another interesting aspect is that it has got a very powerful bipolar output capable of delivering full 100 watts HF power (most Indian diathermy units have only 50 watts output). The quality of bipolar coagulation is also good. Also combination use of monopolar cut with bipolar coagulation side by side is possible. For monopolar, pin point coagulation is possible. Monopolar cutting is very smooth like a scalpel sharp cut. All the accessories are autoclavable . We have used high quality silicone rubber cable and high grade nylon connectors for the accessories ensuring long life.
This model is the top most one in terms of high tech functional features from the SPARK series surgical diathermy units. HF output power can be set digitally in steps of 1 watt upto 400 watts. All types of surgeries right from paediatric upto urological underwater cutting procedures, onco surgeries etc can be comfortably carried out. Specialized featured include inbuilt voltage stabilize capable of with stand voltage fluctuations from 170 to 250 volts. These modes if monopolar coagulation namely soft, forced and spray coagulation are provided. The soft contact coagulation is very useful in lapcoli surgeries where the gall bladder can be safely released from the adjoining structures without any charring. The forced coag is the standard powerful mono coag. Spary coag is useful for superficial sealing of tiny bleeders over a vast area very quickly. This mode is very useful in tobectomy surgeries, TURP and endometriosis in gynaecology. The bipolar coagulation has full 100 watts and produces relatively charring free coagulation Laparoscopic surgeons are provided with a one touch selection for monopolar cut with bipolar coagulation. All advanced functions are grouped together on the front panel with feather touch controls. The urologist are provided with a separate HF output socket on the front panel which gives faster cutting and stronger coagulation effects, at the same time cutting loop life is not reduced.
This diathermy has superior cutting and coagulation effects thanks to the mosfet based technology supported with SMPS for power supply. Unlike conventional electronic surgical diathermy units where transformer and transistor are used to produce HF wave form, for Arc series digital ICs and oscillators are used. This in turn produces superior results for surgical applications. This diathermy is a multifunction high tech surgical diathermy unit. It is the lightest diathermy available in India. It has an inbuilt voltage stabilizer. Further this diathermy is capable of performing fine blended cutting, required in thoracic/Gastro/Laparoscopic surgical applications as well as spray coagulation for wide area surface coagulation effects. This unit can be used for all kinds of surgeries like general surgery, laparoscopy, lapcoli, TURP, TUEVP etc. The bipolar generator has full 100 watts output (most Indian diathermy units have only 50 watts output) and gives real charr free whitish coagulation. This unit is also capable of doing under water cutting giving very good cutting loop life. Also combination use of monopolar cut and bipolar coagulation side by side is enabled to meet needs in laparoscopic surgeries. Monopolar cutting is very smooth comparable to scalpel cut and pinpoint monopolar coagulation also is possible.
Slovac is a silent, portable, slow suction pump designed for continuous use in ICU/Surgical wards/paediatric wards/labour rooms. In ICUs/neonatal/paediatric wards this pump comes handy for removal of phlegm accumulations in the patient's chest in a safe and smooth way. In labour rooms this pump can be used for vacuum assisted delivery. This pump also finds application as a pleural fluid drainage pump for overnight use in cardiac surgery ICUs. Since the flow rate (speed of pumping) and the vacuum (suction effect) can both be varied through the front panel controls, the equipment can be used for multiple applications.
This is a surgical irrigation pump with digital display of pressure which can be regulated with the pressure regulator fixed on the equipment front panel. The pump and motor assembly is of German make and it is capable of high flow with low noise level. This diaphragm pump is oil less type and ideally suited for laparoscopic surgeries. Since the pressure display is digital with precise regulator control this pump finds application in arthroscopy/neuro/ent/gastro surgeries wherever quick washing for removal of blood clots is required. Some of the customers use this pump in their casualty departments for quick cleaning of wounds prior to stitching and dressing.

Oil less diaphragm pump with non contaminating nylon body and imported high quality anti-bacterial hydrophobic filter ensures safe use for surgeries as well as gives a prolonged life for the pump. Surgical time is considerably reduced in laparoscopic surgeries since a better vision of the surgical site free of debris and clots is available all through the surgery. The water jet is powerful enough to dislodge the contents of conception in ectopic removal surgery.

This is a surgical Suction & Irrigation pump having high flow rate., oil less, low noise (imported) diaphragm pump for simultaneous operation of suction and irrigation with pressure and vacuum gauges and flow regulator. This unit has German pump set and is ideal for Lapcoli & Laparoscopy works. This is an advanced version of the Univac Plus Pump but having higher pumping capacity with versatility in control of the functions.

The Univac Duo is a double pump unit housed in a single cabinet for simultaneous use of suction and irrigation functions in Laparoscopic surgeries in Gynaecology and Gastroenterology. This suction – irrigation unit also finds use in specialized surgeries like Arthroscopy / Neuro / ENT / Plastic / advanced applications in general surgery where quick removal of blood and blood clots and pressure washing of the surgical site is required.

Oil less diaphragm pump with non contaminating nylon body and imported high class antibacterial hydrophobic filters ensure safe use for surgeries as well as give prolonged life for the pump. The required (variable vacuum) variable flow rate for the suction side and the precise pressure settings (variable pressure) for the irrigation bottle make this unit ideal for laparoscopic surgery. Surgical time is considerably reduced since a better vision of the surgical site free of debris is available all through the surgery. The water jet is powerful enough to dislodge the contents of conception in ectopic removal surgery.

The special design of the rubber cap with the overflow cut off float assembly ensures reliable vacuum all the item during use. Chances for vacuum failure are practically ruled out by virtue of the bottle cap shape. The unit comes with an inbuilt voltage regulator, which prevents motor burnouts and ensures reliable working under low voltage conditions. Power consumption is only that of an ordinary room lamp (60 watts) and the operation is relatively silent. The compact shape and low weight ensures high portability as well.

The Rolla Endomat is a peristaltic pump which employs a totally non contact method for pumping irrigant into human organs at preset pressures and flow rates.

The Rolla Endomat finds application as hysteromat for diagnostic as well as operative hysteroscopic procedures. In urological procedures it works as a uromat for dilating the ureter. In arthroscopy it finds application as an arthropump for pressurising the knee/shoulder cavity.

The Rolla Multi is an ideal pump for both diagnostic and operative hysteroscopy. It finds application as a suction cum irrigation pump in laparoscopy. In arthroscopy it finds application in shoulder & knee surgeries. It can also be used for dilation of Ureter in Uretero-renoscopy.

Sensor controlled dilation if human organs to preset pressures and flow rates possible. No risk of air embolism while irrigating from bottles thanks to peristaltic pumping method. High power variable suction enables easy cleaning of the surgical site.

Beam 150 is an endoscopic cold light source having two 150 watts halogen bulbs and is ideally suited for endoscopic surgery in Urology/Gynecology/General surgery /ENT etc. This unit has an electronic soft start system ensuring long lamp life.
  1. Light output is a bright circular beam with a wide spread without black spot in the centre and white rings at the outer (These are the two drawbacks with reflector type lamps).
  2. Pin up type 15 volts, 150 watts halogen bulbs give 3000 burning hours life compared with 50 burning hours lamp life for reflector type bulbs.
  3. Change over from lamp 1 to lamp 2 facilitated with a toggle switch.
  4. To ensure longer lamp life the unit is provided with an electronic soft start system and an over voltage cut off system.
  5. The unit directly accepts Karl Storz fibre optic cable. Adapters for other makes of fibre optic cables are also available on request.
  6. The unit body is made of aluminium with powder coat painting having a carry handle.
This is an endoscopic cold light source having two 250 watts halogen bulbs and is ideally suited for use with endocamera in Lapcoli/Hysteroscopy/Arthroscopy etc. – This unit comes with an electronic soft start system ensuring long lamp life. Also the lamp is protected by the inbuilt voltage limiting and stabilizing circuit.
  1. Light output is a bright circular beam with a wide spread.
  2. Change over from lamp 1 to lamp 2 facilitated with a toggle switch.
  3. To ensure longer lamp life the unit is provided with an electronic soft start system and an over voltage cut off system.
  4. The unit directly accepts Karl Storz fibre optic cable. Adapters for other makes of fibre optic cables are also available on request.
  5. The unit body is made of aluminium with powder coat painting having a carry handle.
Performance of this lamp unit is comparable with any other reputed imported lamp unit in its category.
This digital display diathermy is the top most model amongst all the Surgical diathermy units manufactured by the company. This is a microprocessor controlled unit complete with 9 memories. It has the facility to preprogram and recall from memory both the HF output power settings as well as the advanced functions selected in each mode. Three modes of monopolar coagulation namely soft, forced and spray coagulation are provided. The soft contact coagulation is very useful for superficial sealing of tiny bleeders over a vast area very quickly; this mode is very useful in lobectomy, surgeries, TURP and endometriosis in gynaecology.

This diathermy has superior cutting and coagulation effects thanks to the mosfet based technology supported with SMPS for power supply. Unlike conventional electronic surgical diathermy units where transformer and transistor are used to produce HF wave form, for Arc series digital ICs and oscillators are used. This in turn produces superior results for surgical applications. This diathermy is a multifunction high tech surgical diathermy unit. It is the lightest diathermy available in India. It has an inbuilt voltage stabilizer. Further this diathermy is capable of performing fine blended cutting, required in thoracic/Gastro/Laparoscopic surgical applications as well as spray coagulation for wide area surface coagulation effects. This unit can be used for all kinds of surgeries like general surgery, laparoscopy, lapcoli, TURP, TUEVP etc. The bipolar generator has full 120 watts output (most Indian diathermy units have only 50/75 watts output) and gives real charr free whitish coagulation. This unit is also capable of doing under water cutting giving very good cutting loop life. Also combination use of monopolar cut and bipolar coagulation side by side is enabled to meet needs in laparoscopic surgeries. Monopolar cutting is very smooth comparable to scalpel cut and pinpoint monopolar coagulation also is possible.

Diathermy with Vessel Sealer technology

Arc 777 is a multi-functional micro controller based surgical diathermy suitable for both open and endoscopic procedures ranging from paediatric to cardiac surgeries. Specialized functions include automatic vessel sealing, micro/macro bip coag, soft/spray coag, bipcut/underwater cut, combi mode for laparoscopic surgeries etc. Standard features include inbuilt voltage stabilizer, programmable memory, handswitched output etc.

The salient Features include programming facility for power and advanced functions. Hence the power and options for up to 10 surgeries can be saved and recalled as required. Vessel sealing output is capable of sealing vessels up to 7mm with auto-stop once the sealing is complete. It can be used for common procedures like Total Laparoscopic Hysterectomy, Ovariectomy ,Thyroidectomy, Laparoscopic Nephrectomy, Colorectal resections, Hemicolectomy etc

ARC 777 comes with three types of monopolar coagulation. The first is a Forced coag option for normal use. The second is a Soft coag for charr free contact coagulation, which find applications like paediatric and dermatology procedures. The third option is a Spray coag for wide area superficial non-contact coagulation. Similarly for bipolar cogulation there are two modes. Macro coagulation for powerful wide area contact coagulation and Micro coagulation for pin point coagulation in applications like ENT, Neuro, etc

Like all ARC diathermies, there is a steady HF output at set value even under line voltage fluctuating conditions (Voltage Independent Performance Feature) with audio & visual monitoring of patient plate circuit. The ARC 777 comes with combined or independent use of mono & bipolar functions enabled thanks to separate generators for monopolar and bipolar functions. Further this diathermy is capable of performing fine blended cutting, required in thoracic/Gastro/Laparoscopic surgical applications as well as spray coagulation for wide area surface coagulation effects. This unit can be used for all kinds of surgeries like general surgery, laparoscopy, lapcoli, TURP, TUEVP etc. The bipolar generator has full 120 watts output (most Indian diathermy units have only 50/75 watts output) and gives real charr free whitish coagulation. This unit is also capable of doing under water cutting giving very good cutting loop life. Also combination use of monopolar cut and bipolar coagulation side by side is enabled to meet needs in laparoscopic surgeries. Monopolar cutting is very smooth comparable to scalpel cut and pinpoint monopolar coagulation also is possible.

General Description

BIOLAP 30 is a high flow electronic carbon dioxide Insufflator for use in endoscopic/laparoscopic surgeries. Latest micro controller with imported pressure sensor and gas flow regulator ensures stable pressure and flow parameters throughout the procedure. Like other products from the Biomed Electronics stable this equipment has a long life and repeat performance.

High pressure Co2 from the main cylinder can be connected direct to the insufflator which cuts of the need for an external pressure regulator The micro controller based closed loop technology ensures precise control of pressure/ flow parameters and there is a memory that retains last set values of pressure, flow rate and pumped gas volume. An Inbuilt gas warmer provides warm CO2 at trocar minimizing fogging and all disadvantages of chilled gas entering abdomen. Continuous gas flow controller ensures stable abdominal distention during surgery.

Front Panel Displays include Cylinder pressure, low pressure indicator, Preset Pressure, Actual pressure, Preset Flow rate, Actual Flow rate and Pumped gas volume counter with Reset button.

Tumescent liposuction involves injecting a large amount of medicated solution into the areas before the fat is removed. The fluid is a mixture of local anesthetic (lidocaine), a second drug that contracts the blood vessels (epinephrine), and an IV solution like saline. The IV solution helps remove the fat more easily and it is suctioned out along with the fat. This method of liposuction has gained acceptance by the Indian medical practitioners in a very short span of time. The easy accessibility to modern equipment like Tulip Combi means that not only cosmetic surgeons but general surgeons with training in this area are foraying into this new sector.

Tulip Combi is a combination surgical pump system used in tumescent liposuction procedures for fast removal of body fat from subcuteneous layers. The infiltration pump is provided with a variable flow rate (30-300 ml/min) control through a footswitch for precise infusion of tumescent fluid. The infused volume per fat pocket/body limb as well as cumulative infused volume can be digitally monitored.

The oil less piston vacuum pump produces a high vacuum ( -730mm Hg) at a high evacuation rate ( 90 litres/min) capable of sucking out even the stickiest fat mass. The whole equipment operates at a very low noise level (56 db) and is wheel mounted for easy mobility. Tulip combi also comes with two polycarbonate suction collection jars (4 litres &2 litres) which are graduated for easy measuring of collected fluids. These jars are autoclavable and the high capacity means ease of using during longer liposuction procedures.

Salient features are the non-contact type peristaltic infiltration pump ensures contamination free infusion of tumescent solution with pumped volume indicator provided with big size LED displays and reset option. The cumulative volume indication is up to 99.9 litres and infused volume can be read up to 9.99 litres. Memory is enabled for both infused/cumulative volumes.

A speed control for flow rate is very smooth and it is variable from 30ml/min to 300ml/min enabling the surgeon to perform all variety of surgeries with precise footswitch control provided for the infiltration pump. There is smooth control for vacuum variation through a regulator on the front panel and the OIL LESS double piston suction pump ensures silent and maintenance free operation. A changeover valve helps selection either one or both of the suction jars, which means in an event of a longer cases, two surgeons can use the equipment simultaneously.